Document LTP0101 rev 2d

 

User Lock Option (Entering Pass Code)

If LOC is briefly displayed when attempting to change a heat pump's settings followed by a "0", the heat pump is in a user-lock mode. A numerical pass code is required to proceed.

Press "UP" or "DOWN" arrow to enter save pass code.

Press "POOL / SPA" button to unlock.

 

Note -

  • After ten seconds of inactivity, the heat pump's display lock will activate. See "Wake Up Heat Pump"
  • If the user-lock code has been misplaced, please contact AquaCal® for further assistance.